Gas checked bullets

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Morning gents.I do reload a lot of ammo of various calibres including 303 British.
When I bought a lot of un needed ammo and bullets from a friend who packed in a gunsmithing business he included a wide and varied selection of cast , gas checked bullets and suggested using them in short range practice. I was wondering if there is any literature online giving guidance using these for reloading?
I have slugged my barrel and it is .311 , as its a newish barrel I thought this about right.
The bullets vary in weight and in calibre .311 through to .316 and weights up to 182 gr.
The only information he have me was keep them subsonic and suggested Unique as propellant.
I have a lee neck expander to open the case neck before bullet insertion I believe.
Many thanks for any pointers in the right direction.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
martini1215 Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: December 11 2023 Location: Cleethorpes Status: Offline Points: 90	Post Options Post Reply Quote martini1215 Report Post Thanks(0) Quote Reply Topic: Gas checked bullets Posted: December 17 2023 at 4:45am
	Morning gents. I do reload a lot of ammo of various calibres including 303 British. When I bought a lot of un needed ammo and bullets from a friend who packed in a gunsmithing business he included a wide and varied selection of cast , gas checked bullets and suggested using them in short range practice. I was wondering if there is any literature online giving guidance using these for reloading? I have slugged my barrel and it is .311 , as its a newish barrel I thought this about right. The bullets vary in weight and in calibre .311 through to .316 and weights up to 182 gr. The only information he have me was keep them subsonic and suggested Unique as propellant. I have a lee neck expander to open the case neck before bullet insertion I believe. Many thanks for any pointers in the right direction.

HammerDown Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: December 08 2023 Location: PRK Status: Offline Points: 93	Post Options Post Reply Quote HammerDown Report Post Thanks(0) Quote Reply Posted: December 19 2023 at 7:32pm
	There is 303 British load data for cast lead bullets here: "The Complete Guide To Handloading", Sharpe 1937. The document is free to download and the 303 data is on page 382. Unique is one of the powders listed. Lots of useful information for reduced and subsonic loads. http://https://archive.org/details/Complete_Guide_to_Handloading_Sharpe_1937/page/n387/mode/2up

A square 10 Members Profile Send Private Message Find Members Posts Add to Buddy List Special Member Donating Member Joined: December 12 2006 Location: MN , USA Status: Offline Points: 16999	Post Options Post Reply Quote A square 10 Report Post Thanks(0) Quote Reply Posted: December 19 2023 at 8:21pm
	i think i might try this ive got the unique on hand and i can get the cast lead bullets from a friend

martini1215 Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: December 11 2023 Location: Cleethorpes Status: Offline Points: 90	Post Options Post Reply Quote martini1215 Report Post Thanks(0) Quote Reply Posted: December 20 2023 at 3:57am
	Many thanks for that. The slugging of the bore is a useful thing to be able to do anyway and I shall download that information. Regards Martini

britrifles Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: February 03 2018 Location: Georgia, USA Status: Offline Points: 8404	Post Options Post Reply Quote britrifles Report Post Thanks(0) Quote Reply Posted: December 20 2023 at 4:43am
	Lyman reloading manual has cast loads for most calibers including .303. Lyman Cast Bullet Handbook is a good reference on the subject of casting bullets, reloading with cast bullets, etc. For a 200 gr cast bullet, starting loads of 11.0 grains of Unique, 15.5 2400, 18.0 SR-4759, 20.0 IMR-4227, 21.0 5744 and 21.0 IMR-4198. This is out of the Lyman book. You will need to put a slight flair on the case mouth, but not too deep, just enough to get the bullet base to enter the case neck. Also, the neck ID should be no more than .002 inches smaller than the bullet OD, otherwise seating the bullet will size it down. .311 is a fairly tight groove diameter for the .303. Most barrels will have larger groove diameters, .313 - .316 (nominal groove depth is 0.005 inches on a nominal .3030 bore). Accurate shooting depends largely on the bullet filling the full diameter right at the throat. To check this, take a pure lead cast bullet of approx .315 diameter and using a hardwood dowel, tap it into the bore from the breech end to a depth of about 3 to 4 inches from the breech end (mark the dowel at 3.5 inches). Then tap it back out from the muzzle end. Size your cast bullets to .001 over this diameter. Note that measuring the bullet OD is tricky with 5 groove rifling, you have to roll the bullet between your calipers.

martini1215 Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: December 11 2023 Location: Cleethorpes Status: Offline Points: 90	Post Options Post Reply Quote martini1215 Report Post Thanks(0) Quote Reply Posted: December 20 2023 at 12:58pm
	Thanks for the information gents, its going to be a learning curve but now I am retired I intend to keep my mind properly active. All those years doing a job which pretty much was just a means to earn a living can now fund something I really do enjoy.