Print Page | Close Window

.410 Conversion Photos

Printed From: Enfield-Rifles.com
Category: Enfields
Forum Name: Ishapore Enfields
Forum Description: Let's see those Indian Enfields!
URL: http://www.enfield-rifles.com/forum_posts.asp?TID=12896
Printed Date: March 26 2026 at 7:11pm
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com


Topic: .410 Conversion Photos
Posted By: Rickenbacker325
Subject: .410 Conversion Photos
Date Posted: October 08 2023 at 8:52pm
Here are some photos of my Ishapore .410 conversion…I believe it’s a 1917 and was converted in 1930. Note the former volley sight stock..And yes that’s a DP buttstock..as this didn’t have one at all when I bought it..nor did it have a bolt..I can report that it shoots like a champ. One question that I have is..why are there two serial numbers? One on the usual place on the top/side of the receiver and the other one is under the nomenclature. 

https://postimg.cc/0rCHKSzQ" rel="nofollow">

https://postimg.cc/dhhWfS4k" rel="nofollow">

https://postimg.cc/VdGGDcBP" rel="nofollow">

https://postimg.cc/zVX2Cfhk" rel="nofollow">

https://postimg.cc/7b4WL9Yd" rel="nofollow">

https://postimg.cc/N96C49bd" rel="nofollow">

https://postimg.cc/m1TX6L5B" rel="nofollow">

https://postimg.cc/S2FtC7LX" rel="nofollow">

https://postimg.cc/tsJfjgCg" rel="nofollow">

https://postimg.cc/kBfZzSCZ" rel="nofollow">

https://postimg.cc/WdyybPhw" rel="nofollow">

https://postimg.cc/KRZw0N6B" rel="nofollow">

https://postimg.cc/MX0g04Fz" rel="nofollow">

https://postimg.cc/LgSB6xtT" rel="nofollow">

https://postimg.cc/QVZRTsS6" rel="nofollow">

https://postimg.cc/jnh6Wyvr" rel="nofollow">






Replies:
Posted By: A square 10
Date Posted: October 09 2023 at 7:16pm
that looks to be a representative example of what they did to these rifles , as a shotgun i never had much satisfaction with mine , even the one that was bored out for US 410 was marginal in performance for me


Posted By: Rickenbacker325
Date Posted: October 09 2023 at 10:26pm
It really is a smooth operating weapon..and the minimal recoil takes some getting used to. Unfortunately the ammo is a little difficult to find 


Posted By: A square 10
Date Posted: October 10 2023 at 12:45am
you need to reload - if its still traditional 410 [blown out303]  you may only need to change dies in your loaders , otherwuise enoy it 


Posted By: Bear43
Date Posted: October 10 2023 at 7:23am
I need to finish up the ones I have. I bought 5 when Century was clearing them out and have overhauled one so far. They are fun.


Posted By: Rickenbacker325
Date Posted: October 10 2023 at 8:15am
Originally posted by Bear43 Bear43 wrote:

I need to finish up the ones I have. I bought 5 when Century was clearing them out and have overhauled one so far. They are fun.

They certainly are fun…The whole single shot and that strange round makes for a bizarre range experience…I might actually get another one 


Posted By: paddyofurniture
Date Posted: October 10 2023 at 10:46am
I have one that I am using to train a six year old Granddaughter. 

This is from a bench and sandbag setup.




-------------
Always looking for military manuals, Dodge M37 items,books on Berlin Germany, old atlases ( before 1946) , military maps of Scotland. English and Canadian gun parts.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.07 - https://www.webwizforums.com
Copyright ©2001-2024 Web Wiz Ltd. - https://www.webwiz.net